5Press and hold the key (on the other remote control unit) which has the function you want to store.
* When is finished, the TRANSMIT/LEARN indicator stops lighting and then begins flashing slowly.
*If a signal is not successfully received, the TRANSMIT/LEARN indicator flashes rapidly and the mode prior to step 4 is restored. If this occurs, restart from step 4.
*If memory capacity is full, the TRANSMIT/LEARN indicator flashes rapidly to show you that learning is impossible, and then the mode before you began learning operations is restored.
6Repeat step
7When you finish the learning operation, press the LEARN button.
CLEAR LEARN MACRO
NOTES
•Newly learned functions will replace previously learned functions.
•If there is no more room in the memory area for a function to be learned, the TRANSMIT/LEARN indicator will flash rapidly. In this case, even if some keys are not occupied with functions from other remote control units, no further learning is possible.
•If the lid is closed while learning and about 5 seconds pass, the TRANSMIT/LEARN indicator flashes rapidly and the mode before you began learning operations is restored. If this occurs, restart from step 2. However, if the lid is opened within 5 seconds, the mode before the lid was closed is restored.
•There may occasionally be instances in which, due to the
English
73