Mode Performance

MKB TxSW4 (Master keyboard Transmit Switch 4)

For each zone, you can enable or disable the transmission of Bank Select and Program Change messages when you switch Performance Banks or Programs.

 

 

 

 

 

 

MKB’TxSw4)

Bank

PC

￿

 

Zone01

on

on

 

 

 

 

 

 

❏Settings:

Bank (Bank Select): off, on

PC (Program Change): off, on

MKB TxPreset1 (Master Keyboard Transmit Preset 1)

You can set each zone’s initial volume and stereo pan settings when changing Performance Bank/Program.

 

 

 

 

 

 

MKB’TxPreset1)

Volume

Pan

￿

 

Zone01

127

C

 

 

 

 

 

 

■Vol (Volume)

Set the output level of the zone.

❏ Settings: 0 ~ 127

This setting is not transmitted if the Vol (Volume) parameter of the MKB TxSw3 screen has been set to “off.”

■Pan

Set the stereo pan position of the zone.

❏ Settings: L64 (Left) ~ C (Center) ~ R63 (Right)

This setting is not transmitted if the Pan parameter at the MKB TxSw3 screen has been set to “off.”

MKB TxPreset2 (Master Keyboard Transmit Preset 2)

For each zone, you can set the Bank Select and Program Change parameters transmitted when changing Bank/Program in a Performance.

 

 

 

 

 

 

 

MKB’TxPreset2)

BankMSB

BankLSB

PC

￿

 

Zone01

127

127

1

 

 

 

 

 

 

 

■BankMSB (MIDI Bank Select MSB)

Set the Bank Select MSB transmitted when changing Bank/Program.

❏ Settings: 0 ~ 127

■BankLSB (MIDI Bank Select LSB)

Set the Bank Select LSB transmitted when changing Bank/Program.

❏ Settings: 0 ~ 127

“Bank Select” is a type of MIDI message transmitted when changing Voice Bank. Control Change MSB and LSB messages are combined to form Bank Select messages, which are used to specify the Voice Bank. These message values will vary according to synthesizer. For more details, refer to the documentation that came with your synthesizer.

This setting is not transmitted if the Bank (Bank Select) parameter at the MKB TxSw4 screen has been set to “off.”

■PC (MIDI Program Change)

Set the Program Number transmitted when changing Bank/Program.

❏ Settings: 1 ~ 128

Program Numbers 001 to 128 directly relate to MIDI

Program Change Numbers 000 to 127. That is, Program Numbers and Program Change Numbers differ by a value of 1. Remember to take this into consideration.

This setting is not transmitted if the PC (Program Change) parameter at the MKB TxSw4 screen has been set to “off.”

MKB Assign (Master Keyboard Assign)

You can assign a different Control Slider function (Control Change) to each zone.

MKB’Assign)

ControlSlider

 

Zone01

07[Main Vol]

￿

￿

❏Settings: off, 1 ~ 95

122