Card Mode
In Card Mode, you can use Memory Card, a SmartMedia™ card available at a consumer electronics shop, etc., to save or load data from/to the instrument or perform other data exchange operations between memories on the instrument and the Card. Using the included Card Filer software, you can use a computer to manage data on Memory Card. You can also use it to exchange data between the computer and Memory Card.
Handling the Memory Card(SmartMedia™*)
Be sure to handle Memory Cards with care. Follow the important precautions below.
* SmartMedia is a trademark of Toshiba Corporation.
■Compatible Memory Card Type
3.3V(3V) Memory Cards can be used. 5V type Memory Cards are not compatible with this instrument.
■Memory Capacity
There are five types of Memory Cards: 2MB/4MB/8MB/16MB/32MB. A Memory Card with the memory capacity exceeding 32MB can also be used if it conforms to the standards of SSFDC (Solid State Memory Card Card: another name of SmartMedia) Forum.
■Inserting/Removing Memory Cards
•To insert a Memory Card:
Hold the Memory Card so that the connector section (gold) of the Memory Card is facing downward and forward, towards the Memory Card slot. Carefully insert the Memory Card into the slot, slowly pushing it all the way in until it is fitted in place.
-Don’t insert the Memory Card in wrong direction.
-Don’t insert anything other than a Memory Card in the slot.
•To remove a Memory Card:
Make sure to turn the instrument off and pull the Memory Card out of the slot.
Always the instrument must be turned off before removing the Memory Card.
However, if the Memory Card's memory is full and you want to exchange it with a new one to save your currently edited data, follow the following procedure: Before removing the Memory Card, be sure to confirm that the Memory Card is not in use, or it is not being accessed by the instrument. Then pull the Memory Card out slowly by hand. If the Memory Card is being accessed*, a message indicating that it is in use appears on the instrument's display.
*It includes saving, loading, formatting, deleting and making directory. Also, be aware that the instrument will automatically access the Memory Card to check the media type when it is inserted while the instrument is turned on.
Never attempt to remove the Memory Card or turn the power off during accessing. Doing so can damage the data on the instrument/Memory Card and possibly the Memory Card itself.
■Formatting Memory Cards
Before using a Memory Card with your instrument it must first be formatted. Once it is formatted all data on it will be erased. Be sure to check if the data is unnecessary for you or not, beforehand.
The Memory Cards formatted with this instrument may become unusable with other instruments.
■About the Memory Cards
•To handle Memory Cards with care:
There are times when static electricity affects Memory Cards. Before you handle Memory Cards, to reduce the possibility of static electricity, touch the metal parts such as a door knob and aluminum sash.
Be sure to remove the Memory Card from the Memory Card slot when it is not in use for a long time.
Do not expose the Memory Card to direct sunlight, extremely high or low temperatures, or excessive humidity, dust or liquids.
Do not place heavy objects on a Memory Card or bend or apply pressure to the Memory Card in any way.
Do not touch the metal part (gold) of the Memory Card or put any metallic plate onto the metal part.
Do not expose the Memory Card to magnetic fields, such as those produced by televisions, speakers, motors, etc., since magnetic fields can partially or completely erase data on the Memory Card, rendering it unreadable.
Do not attach anything other than the provided labels to a Memory Card. Also make sure that labels are attached in the proper location.
•To protect your data
To prevent inadvertent erasure of important data, stick the
Conversely speaking, to save data on the Memory Card, make sure to remove the
■Data Backup
For maximum data security Yamaha recommends that you keep two copies of important data on separate Memory Cards. This gives you a backup if one Memory Card is lost or damaged.
■Burglarproof Lock
This instrument is equipped with a burglarproof lock for the Memory Card. If necessity arises, mount the burglarproof lock onto the instrument.
To mount the burglarproof lock:
1 Remove the metallic part using a Phillips screwdriver.
2 Turn the metallic part upside down and then mount it again.
Card Mode
135