E

EMU01501¯

POWER TILT SWITCH

The power tilt adjusts the motor angle in relation to the transom. The power tilt switch is located on top of the steering bracket. Pushing the switch “UP” trims the motor up, then tilts the motor up. Pressing the switch “DN” tilts the motor down and trims the motor down. When the switch button is released, the motor will stop in its current position.

WARNING

Use the power tilt switch located on top of the steering bracket only when the boat is at a complete stop with the engine off. Attempting to use the cowling -mounted power tilt switch while the boat is moving could increase the risk of falling overboard and could distract the operator, increasing the risk of collision with another boat or an obstacle.

NOTE:

Refer to the section “Tilting Up/Down” for instructions on usage.

EMU00152

TILT LOCK MECHANISM (for Manual tilt model)

The tilt-lock mechanism is used to prevent reverse thrust from the propeller lifting the outboard motor when reversing. To lock it, set the tilt-lock lever in the up position. To release it, push the tilt-lock lever down.

1Tilt-lock lever

2-14