E

EMU01000

PROCEDURE FOR REMOTE CONTROL MODEl

4)Place the remote control lever in the Neutral position. When the engine is warm, open the throttle slightly using the neutral throttle lever or the free acceler- ator. After the engine starts, return the throttle to the fully closed position.

NOTE:

The start-in-gear protection device prevents the engine from starting except when in Neutral.

5)Attach the engine stop switch lanyard to a secure place on your clothing, or your arm or leg. Then, install the lock plate on the other end of the lanyard in the engine stop switch.

WARNING

●Attach the engine stop switch lanyard to a secure place on your clothing, your arm or leg while operating.

●Do not attach the lanyard to clothing that could tear loose. Do not route the lanyard where it could become entan- gled, preventing from functioning.

●Avoid accidentally pulling the lanyard during normal operation. Loss of engine power means the loss of most steering control. Also, without engine power, the boat could slow rapidly. This could cause people and objects in the boat to be thrown forward.

6) Turn the main switch to “ON”.

3-13