E

EMU01414

Power Tilt Model

WARNING

Be sure all people are clear of the out- board motor when adjusting the tilt angle, also be careful not to pinch any body parts between the drive unit and clamp bracket.

Use caution when trying a trim posi- tion for the first time. Increase speed gradually and watch for any signs of instability or control problems. Improper trim angle can cause loss of control.

Use the power tilt switch located on the bottom engine cowling (if equipped) only when the boat is at a complete stop with the engine off.

1)Place the gear-shift lever in the neutral position.

3-21