Basic components
When constant speed is desired, tighten the adjuster to maintain the desired throttle set- ting.
EMU25990
Engine stop lanyard switch
The lock plate must be attached to the engine stop switch for the engine to run. The lanyard should be attached to a secure place on the operator’s clothing, or arm or leg. Should the operator fall overboard or leave the helm, the lanyard will pull out the lock plate, stopping ignition to the engine. This will prevent the boat from running away under power.
EWM00120
WARNING
●Attach the engine stop switch lanyard to a secure place on your clothing, or your arm or leg while operating.
●Do not attach the lanyard to clothing that could tear loose. Do not route the lanyard where it could become entan- gled, preventing it from functioning.
●Avoid accidentally pulling the lanyard during normal operation. Loss of engine power means the loss of most steering control. Also, without engine power, the boat could slow rapidly. This could cause people and objects in the boat to be thrown forward.
NOTE:
The engine cannot be started with the lock plate removed.
1.Lanyard
2.Lock plate
1.Lanyard
2.Lock plate
EMU26001
Engine stop button
To open the ignition circuit and stop the en- gine, push this button.
18