Operation
4.Pull out / turn the choke knob fully. After the engine starts, replace / return the knob to the home position.
6.After the engine starts, slowly return the manual starter handle to its original posi- tion before releasing it.
7.Slowly return the throttle grip to the fully closed position.
NOTE:
●It is not necessary to use the choke when starting a warm engine.
●If the choke knob is left in the “
” (start) position while the engine is running, the en- gine will run poorly or stall.
5.Pull the manual starter handle slowly until you feel resistance. Then give a strong pull straight out to crank and start the en- gine. Repeat if necessary.
ZMU02030
NOTE:
●When the engine is cold, it needs to be warmed up. For further information, see page 32.
●If the engine does not start on the first try, repeat the procedure. If the engine fails to start after 4 or 5 tries, open the throttle a small amount (between 1/8 and 1/4) and try again. Also if the engine is warm and fails to start, open the throttle a same amount and try to start the engine again. If the engine still fails to start, see page 66.
EMU27642
Electric start / remote control models
1.Place the remote control lever in neutral.
30