Yamaha TYROS - page 93

Song Playback

Reference

TYROS Owner’s Manual

The following parameters can be set in step #3 in “Basic Procedure” on page 92.

■ Repeat Playback parameters

■ MIDI Channel parameters

■ Lyric Display parameters

■ Quick Start parameter

REPEAT MODE

Determines the method of repeat playback.

OFF

Plays through the selected song, then stops.

SINGLE

Plays through the selected song repeatedly.

ALL

Continues playback through all the songs in the specified folder repeatedly.

RANDOM

Continues playback at random through all the songs in the specified folder re-

peatedly.

REPEAT FOLDER

Determines the directory in which the songs are played in sequence when the RE-

PEAT MODE is set to “ALL” or “RANDOM.” Here, the directory refers to the path

(page 72) memorized to each of the SONG [I] - [VI] buttons.

CURRENT

Sequentially plays all songs in the directory containing the currently selected

song, starting with the currently selected song.

ALL

Sequentially plays all songs in all directories (memorized to the SONG [I] - [VI]

buttons. Playback starts with the currently selected song, then the remainder

of the songs in the current directory, followed by the songs in the other directo-

ries.

PHRASE MARK REPEAT

Phrase Mark is a pre-programmed part of some song data, which specifies a cer-

tain location (set of measures) in the song. When this is on, the section corre-

sponding to the specified Phrase Mark number is repeatedly played back (page 91)

LEFT CH

This parameter is available when the AUTO CH SET below is set to “OFF.” This

parameter determines which MIDI channel in the song data is assigned to the Left-

hand part of the Guide function and the Song Score function.

RIGHT CH

This parameter is available when the AUTO CH SET below is set to OFF. This

parameter determines which MIDI channel in the song data is assigned to the

Right-hand part of the Guide function and the Song Score function.

HARMONY CH Determines the MIDI channel in the song data of which the note events are used

for applying the Vocal Harmony to the microphone sound.

AUTO CH SET

When set to “ON,” this automatically sets the proper MIDI channels for the Right-

and Left hand parts preprogramed in the commercially available song data. Nor-

mally, this should be set to “ON.” If this is set to “OFF,” the LEFT CH and RIGHT

CH parameters above are available.

LYRICS LANGUAGE

Determines the language of the displayed lyrics.

AUTO

When the language is specified in the song data, the lyrics are displayed ac-

cordingly. When the language is not specified in the song data and the Lan-

guage parameter on the [FUNCTION] → UTILITY → OWNER display (page

158) is set to JAPANESE, the lyrics language is regarded as JAPANESE be-

low. When the language is not specified in the song data and the Language

parameter on the [FUNCTION] → UTILITY → OWNER display (page 158) is

set to something other than JAPANESE, the lyrics language is regarded as

INTERNATIONAL below.

JAPANESE

Handles the displayed lyrics as Japanese.

INTERNATIONAL

Handles the displayed lyrics as a western language.

QUICK START

On some commercially available song data, certain settings related to the song

(such as voice selection, volume, etc.) are recorded to the first measure, before the

actual note data. When Quick Start is set to “ON,” the TYROS reads all initial non-

note data of the song at the highest possible speed, then automatically slows down

to the appropriate tempo at the first note. This allows you to start playback as quick-

ly as possible, with a minimum pause for reading of data.