Yamaha TYROS - page 95

Song Creator (Digital Recording)
Reference
95
TYROS Owner’s Manual
93
Record Mode Settings (Setting up for Re-recording)
The following parameters can be set when you call up the REC MODE page in step #4 of the Basic Procedure. Set the parameters
below and press the [REC] button to re-record an existing song by following the instructions (from step #2 to end) in the “Quick
Guide.”
■ REC START settings.................................................................................................................................
■ REC END settings......................................................................................................................................
■ PEDAL PUNCH IN/OUT settings..........................................................................................................
When this is set to ON, you can use Foot Pedal 2 to control the punch-in and punch-out points. While a song is playing
back, pressing (and holding) Foot Pedal 2 instantly enables Punch In recording, while releasing the pedal stops
recording (Punch Out). You can press and release Foot Pedal 2 as often as you want during playback to punch in/out
of overwrite recording. Note that the current function assignment of the sostenuto pedal is cancelled when the Pedal
Punch In/ Out function is set to ON.
Examples for re-recording depending on the REC MODE settings
The TYROS features several different ways you can re-record or replace a specific section of an already recorded
channel. The illustrations below indicate a variety of situations in which selected measures in an eight-measure
phrase are re-recorded.
NORMAL Pressing the SONG [START/STOP] button or playing the keyboard with [SYNC START] on starts
overwrite recording.
FIRST KEY ON The song plays back normally, then starts overwrite recording as soon as you play the keyboard.
PUNCH IN AT The song plays back normally up to the indicated Punch In measure, then starts overwrite record-
ing at the specified Punch In measure (set with the corresponding LCD button).
REPLACE ALL This deletes all data following the point at which recording is stopped.
PUNCH OUT The song position at which recording is stopped is regarded as the Punch Out point. This setting
maintains all data following the point at which recording is stopped.
PUNCH OUT AT Actual overwrite recording continues until the specified Punch Out measure (set with the corre-
sponding LCD button), at which point recording stops and normal playback continues.
12345678
12345
12345678
12345678
12345
12345678
12345678
12345
12345678
68
12345 7
REC START setting
REC END setting
NORMAL
REPLACE ALL
NORMAL
PUNCH OUT
NORMAL
PUNCH OUT AT=006
FIRST KEY ON
REPLACE ALL
FIRST KEY ON
PUNCH OUT
FIRST KEY ON
PUNCH OUT AT=006
PUNCH IN AT=003
REPLACE ALL
PUNCH IN AT=003
PUNCH OUT
PUNCH IN AT=003
PUNCH OUT AT=006
Original data
Start overwrite
recording *1
Start overwrite
recording *1
Start overwrite
recording *1
Play back
original data
Play back
original data
Play back
original data
Play back
original data
Play back
original data
Play back
original data
Play the keyboard to start
overwrite recording
Play the keyboard to start
overwrite recording
Play the keyboard to start
overwrite recording
Start overwrite recording
Start overwrite recording
Start overwrite recording
Stop recording *2
Stop recording *2
Stop overwrite recording/
play original data
Stop recording *2
Stop recording *2
Stop overwrite recording/
play original data
Stop recording *2
Stop recording *2
Stop overwrite recording/
play original data
Deleted
Deleted
*1 To avoid overwriting measures 1 - 2,
start recording from measure 3.
*2 To stop recording, press the [REC]
button at the end of measure 5.
Previously recorded data
Newly recorded data
Deleted data
Deleted