Yamaha 006IPTO-F0, WD83390

116 Chapter 9—Input & Output Patching

DM1000 Version 2—Owner’s Manual

Insert Patching

The DM1000’s Input Channels and Output Channels (Stereo Out, Bus Out 1–8, Aux Out

1–8) feature independent Insert Ins and Outs. Inputs, outputs, slot channels, and internal

effects processor inputs and outputs can be patched to the Output Channel Insert Ins and

Outs. In this way, you can send the signals to external effects processors for processing, or

insert internal effects.

Individual Insert Patching

You can patch the DM1000’s inputs, outputs, slot channels, and effects processor inputs and

outputs to the Insert Ins and Outs. The same procedure applies to both Input Channels and

Output Channels.

1 Press the [SEL] button or move the fader of an Input Channel or Output

Channel for Insert patching.

2Press the [ /INSERT/DELAY] button repeatedly until the /INS/DLY | Insert

page appears.

This page contains the following parameters:

APOSITION

This parameter determines the insert position of the Insert patch or compressor. The

insert position is indicated by highlighted COMP or INSERT buttons.

Effects

Input Output

Output connector Input connector

Insert Out Insert In

Channel