Yamaha 006IPTO-F0, WD83390

Using Libraries 175

DM1000 Version 2—Owner’s Manual

Libraries

Using Libraries

Channel Library

Channel library enables you to store and recall Input Channel and Output Channel param-

eter settings. The library contains two preset memories and 127 user (readable & writable)

memories.

You can recall only the settings for the currently-selected channels from the Channel library.

For example, you can recall Input Channel settings to Input Channels, but not to Bus Outs,

Aux Sends, or Stereo Out, with the exception that memories #0 and #1 can be recalled to

any channels.

Follow the steps below to use the Channel library.

1 Press the DISPLAY ACCESS [VIEW] button, then press the [F3] button.

The View | Library page appears.

ASEL CH

This parameter indicates the currently-selected channel.

BCURRENT CONFIGURATION section

If the currently-selected channel is an Input Channel, its Surround mode and Aux con-

ﬁguration information is displayed here.

CLevel meters

These meters indicate the levels of the currently-selected channel and the available part-

ner.

DSTORED FROM

This parameter indicates the channel for which the settings were originally stored in the

selected library memory. If the currently-selected library memory contains Input Chan-

nel settings, its Surround mode and Aux pairing information are also displayed below

this parameter.

2Use the LAYER buttons to select layers, then press the [SEL] buttons to select

channels.

For details on the Store and Recall functions, see “General Library Operation” on page 173.

If the selected memory’s channel type does not match the type of the destination channel,

an alarm mark ( ) and the word “CONFLICT” appear next to the STORED FROM

parameter. These alarms indicate that you tried to recall unrecallable channel settings to the

currently-selected channel.