4-40
ENG
CLUTCH
NOTE:
NOTE:
7. Install:
Friction plates (narrow type) 1
Clutch plates 2
Stopper ring 3
Friction plates (wide type) 4
a. Install the friction plate of narrow contact face
1 and one of the clutch plate to the clutch
boss.
b. Install the stopper ring 3.
Install the stopper ring onto the groove around
the clutch boss with both ends of the ring fitted in
the hole a on the boss.
c. Install the other 6 clutch plates and the 6 fric-
tion plates of wide contact face alternately.
d. Install the another friction plate of narrow
face.
8. Install:
Pressure plate 1
Spring housing 2
Clutch spring 3
Plate 4
Bolts (clutch spring)
Tighten the bolts (clutch spring) in stages, using
a crisscross pattern.
Bolt (clutch spring):
8 Nm (0.8 mkg)