1-5
GEN
INFO
SPECIAL TOOLS
EB104000
SPECIAL TOOLS
The following special tools are necessary for complete and accurate tune-up and assembly.
Use only the appropriate special tools as this will help prevent damage caused by the use of inappropri-
ate tools or improvised techniques.
When placing an order, refer to the list provided below to avoid any mistakes.
Tool No. Tool name/Function Illustration
90890-01268
90890-01403 Exhaust & steering nut wrench
Ring nut wrench
This tools are used to loosen and tighten
the steering ring nut.
90890-01304 Piston pin puller
This tool is used to remove the piston pins.
90890-01312 Fuel level gauge
This tool is used to measure the fuel level in
the float chamber.
90890-01367
90890-01374 Fork seal driver weight
Fork seal driver attachment (ΓΈ43)
These tools are used when installing the
fork seal.
90890-01326
90890-01327 T-handle
Damper rod holder
These tools are used to hold the damper
rod assembly when loosening or tightening
the damper rod assembly bolt.
90890-03081
90890-04082 Compression gauge
Adapter
These tools are used to measure engine
compression.
90890-03094 Vacuum gauge
This guide is used to synchronize the car-
buretors.
90890-03112 Pocket tester
This tool is used to check the electrical sys-
tem.