5-7
CARB
CARBURETORS
NOTE:
EAS00493
INSTALLING THE CARBURETORS
1. Adjust:
carburetor synchronization
Refer to “SYNCHRONIZING THE CARBU-
RETORS” in chapter 3.
2. Adjust:
engine idling speed
Engine idling speed
1,000 1,100 r/min
Refer to “ADJUSTING THE ENGINE IDLING
SPEED” in chapter 3.
3. Adjust:
throttle cable free play
Throttle cable free play (at the
flange of the throttle grip)
3 5 mm
Refer to “ADJUSTING THE THROTTLE
CABLE FREE PLAY” in chapter 3.
EAS00497
MEASURING AND ADJUSTING THE FUEL
LEVEL
1. Measure:
fuel level a
Out of specification Adjust.
Fuel level (below the line on the
float chamber)
3.5 4.5 mm
a. Stand the motorcycle on a level surface.
b. Place the motorcycle on a suitable stand to
ensure that the motorcycle is standing
straight up.
c. Install the fuel level gauge 1 to the fuel drain
pipe 2.
Fuel level gauge
90890-01312
d. Loosen the fuel drain screw 3.
e. Hold the fuel level gauge vertically next to the
line on the float chamber
f. Measure the fuel level a.
Fuel level readings should be equal on both
sides of the carburetor assembly.
2. Adjust:
fuel level