Yamaha XJR1300 (L) '99

6-55

CHAS

THE HANDLEBAR

NOTE:

WARNING

3. Install:

handlebar grip 1

left grip end 2

There should be 1  3 mm of clearance a be-

tween the handlebar grip and the left grip end.

4. Install:

left handlebar switch 1

Align the pin on the left handlebar switch with

the hole a in the handlebar.

5. Install:

master cylinder (clutch) 1

master cylinder bracket 2

Align the mating surfaces of the master cylinder

with the punch mark a on the handlebar.

6. Install:

throttle grip 1

throttle cable housing 2

throttle cables 3

Apply a thin coat of lithium soap base grease

onto the inside of the throttle grip and install it

onto the handlebar.

Make sure that the pin a on the throttle

cable housing is aligned with the hole b in

the handlebar.

7. Install:

right grip end 1

right handlebar switch 2

Make sure that the throttle grip operates

smoothly.