E
EJU01961
Water separator
Check the water separator 1 for water. Normally the water separator is empty. The water separator retains any water entering through the fuel tank breather hose if the watercraft is capsized.
If water remains in the water separator, drain it by removing the drain screw 2. Place a drain pan under the water separator to catch the draining water or use a dry cloth to soak up any water that could spill into the watercraft. If any water spills into the water- craft, be sure to wipe it up with a dry cloth. Be sure to install the drain screw after draining the water separator.
EJU01053
Bilge
Check for moisture and fuel residue in the bilge.
Excessive water in the bilge can splash into the carburetor and engine which could cause engine damage.
To remove water from the bilge:
1.Remove the stern drain plugs.
2.Raise the bow of the watercraft until the water drains.
3.After the water has drained, wipe the bilge with dry rags to make sure that the bilge is thoroughly dry.
4.Install the drain plugs.
CAUTION:
●Make sure that the stern drain plugs are tightened securely before launch- ing the watercraft.
●Clean any foreign materials, such as dirt or sand, from the drain plug threads before installing the drain plugs.