Control Surface 15
01V96i—Owner’s Manual
Control Surface
& Rear Panel
Data Entry Section
1Parameter wheel
This control adjusts the parameter values shown on
the display. Turning it clockwise increases the value;
turning it counterclockwise decreases the value.
This wheel also enables you to scroll a displayed list
and select a character for entry (see page 21).
2[ENTER] button
This button activates a selected (highlighted) but-
ton on the display, and confirms the edited param-
eter values.
3[DEC]/[INC] buttons
These buttons increment or decrement a parameter
value by one. Pressing the [INC] button increments
the value; pressing the [DEC] button decrements
the value. Holding down either key increments or
decrements the value continuously.
4Left, Right, Up, Down ([ ]/[ ]/[ ]/[ ])
cursor buttons
These buttons move the cursor around the display
pages, or select parameters and options. Holding
down a cursor button moves the cursor continu-
ously in the corresponding direction.
SOLO Section
1[SOLO] indicator
This indicator flashes when single
or multiple channels are soloed.
2[CLEAR] button
This button “unsolos” all soloed
Channels.
ENTER
DEC INC
2

31

4
SOLO CLEAR

1 2