Keyboard Stand Assembly
Owner’s Manual 61
ENGLISH
8. Set the adjuster.
Rotate the adjuster until it comes in firm contact
with the floor surface.
9. Attach the headphone hanger.
Install the headphone hanger using included two
screws (4 x 10mm) as shown in the figure.
■ Connecting the pedal cord
Insert the pedal cord securely until the metal part of the
cord plug disappears from view. Otherwise, the pedal
may not function properly.
MIDI
Insert the cord all the
way until the metal part
of the plug disappears
from view.
OFF
OFF
ON
ON
NORMAL
NORMAL
(HP
(HP
.SW)
.SW)
SPEAKER
SPEAKER
PHONES
PHONES
After completing the assembly, please check the fol-
lowing.
• Are there any parts left over?
Review the assembly procedure and correct any
errors.
• Is this instrument clear of doors and other movable
fixtures?
Move the instrument to an appropriate location.
•Does this instrument make a rattling noise when you
shake it?
Tighten all screws.
•Does the pedal box rattle or give way when you step
on the pedals?
Turn the adjuster so that it is set firmly against the floor.
•Are the pedal and power cords inserted securely into
the sockets?
Check the connection.
• If the main unit creaks or is otherwise unsteady
when you play on the keyboard, refer to the assem-
bly diagrams and retighten all screws.
CAUTION
When moving the instrument after assembly, always hold
the bottom of the main unit.
Do not hold the key cover or top portion. Improper han-
dling can result in damage to the instrument or personal
injury.
Hold here.
Do not hold here.
Do not hold here.