MIDI Data Format / MIDI-Datenformat /Format des données MIDI / Formato de datos MIDI

If you’re already very familiar with MIDI, or are using a computer to control your music hardware with computer- gener-ated MIDI messages, the data provided in this section can help you to control the YDP-223.

Falls Sie bereits mit MIDI vertraut sind oder einen Computer zur Erzeugung von MIDI-Steuermeldungen für die Instrumente verwenden, können Sie sich zur Steuerung des YDP-223 nach den im folgenden Abschnitt aufgeführten Spezifikationen richten.

1. NOTE ON/OFF

Data format: [9nH] -> [kk] -> [vv]

9nH = Note ON/OFF event (n = channel number)

kk= Note number (Transmit: 09H ~ 78H = A-2 ~ C8 / Receive: 00H ~ 7FH = C-2 ~ G8)*

vv = Velocity (Key ON = 01H ~ 7FH, Key OFF = 00H)

Data format: [8nH] -> [kk] -> [vv] (reception only)

8nH = Note OFF event (n = channel number)

kk= Note number: 00H ~ 7FH = C-2 ~ G8 vv = Velocity

* If received value exceeds the supported range for the selected voice, the note is adjusted by the necessary num- ber of octaves.

2.CONTROL CHANGE

Data format: [BnH] -> [cc] -> [vv]

BnH = Control change (n = channel number)

cc = Control number vv = Data Range

(1)Bank Select

 

ccH

Parameter

Data Range (vvH)

 

00H

Bank Select MSB

00H:Normal

 

20H

Bank Select LSB

00H...7FH

 

Bank selection processing does not occur until receipt of

 

next Program Change message.

(2)

Main Volume (reception only)

 

ccH

Parameter

Data Range (vvH)

 

07H

Volume MSB

00H...7FH

(3)

Expression

 

 

ccH

Parameter

Data Range (vvH)

 

0BH

Expression MSB

00H...7FH

(4)

Damper

 

 

ccH

Parameter

Data Range (vvH)

 

40H

Damper MSB

00H...7FH

(5)

Sostenuto

 

 

ccH

Parameter

Data Range (vvH)

 

42H

Sostenuto

00H-3FH:off, 40H-7FH:on

(6)

Soft Pedal

 

 

ccH

Parameter

Data Range (vvH)

 

43H

Soft Pedal

00H-3FH:off, 40H-7FH:on

(7)

Effect1 Depth (Reverb Send Level)

 

ccH

Parameter

Data Range (vvH)

 

5BH

Effect1 Depth

00H...7FH

 

Adjusts the reverb send level.

 

(8)

Effect4 Depth (Variation Effect Send Level)

 

ccH

Parameter

Data Range (vvH)

 

5EH

Effect4 Depth

00H...7FH

Si vous êtes très familier avec l’interface MIDI ou si vous utilisez un ordinateur pour commander votre matériel de musique au moyen de messages MIDI générés par ordinateur, les données suivantes vous seront utiles et vous aideront à commander le YDP-223.

SI usted está ya familiarizado con MIDI, o si emplea una computadora para controlar sus aparatos musicales con mensajes MIDI generados por computadora, los datos proporcionados en esta sección le ayudarán a controlar la YDP-223.

3. MODE MESSAGES

Data format: [BnH] -> [cc] -> [vv]

BnH = Control event (n = channel number)

cc = Control number vv = Data Range

(1)All Sound Off

ccH

Parameter

Data Range (vvH)

78H

All Sound Off

00H

Switches off all sound from the channel. Does not reset Note On and Hold On conditions established by Channel Messages.

(2) Reset All Controllers

 

 

ccH

Parameter

Data Range (vvH)

79H

Reset All Controllers

00H

Resets controllers as follows.

 

 

Controller

Value

Expression

127 (max)

Damper Pedal

0

(off)

Sostenuto

0

(off)

Soft Pedal

0

(off)

(3) Local Control (reception only)

 

ccH

Parameter

Data Range (vvH)

7AH

Local Control

00H (off), 7FH (on)

(4) All Notes Off

 

 

ccH

Parameter

Data Range (vvH)

7BH

All Notes Off

00H

Switches OFF all the notes that are currently ON on the spec- ified channel. Any notes being held by the damper or sostenuto pedal will continue to sound until the pedal is released.

(5) Omni Off (reception only)

 

ccH

Parameter

Data Range (vvH)

7CH

Omni Off

00H

Same processing as for All Notes Off.

(6) Omni On (reception only)

 

ccH

Parameter

Data Range (vvH)

7DH

Omni On

00H

Same processing as for All Notes Off.

(7) Mono (reception only)

 

ccH

Parameter

Data Range (vvH)

7EH

Mono

00H

Same processing as for All Sound Off.

(8) Poly (reception only)

 

ccH

Parameter

Data Range (vvH)

7FH

Poly

00H

Same processing as for All Sound Off.

•When control change reception is turned OFF in the Function mode, control change data will not be transmitted or received except for Bank Select and Mode messages.

•Local on/off, OMNI on/off are not transmitted. (The appropriate note off number is supplied with “All Note Off” transmission).

•When a voice bank MSB/LSB is received, the number is stored in the internal buffer regardless of the received order, then the stored value is used to select the appropriate voice when a program change message is received.

•The Multi-timbre and Poly modes are always active. No change occurs when OMNI ON, OMNI OFF, MONO, or POLY mode messages are received.

YDP-223Appendix/Anhang/Annexe/Apéndice 61