Controls and functions
Front panel
INTELLIBEAM MIC | INPUT | VOLUME | STANDBY/ON |
1 | 2 | 3 | 4 5 | 6 |
INTRODUCTION
1INTELLIBEAM MIC jack
Connect the supplied IntelliBeam microphone for AUTO SETUP (see page 32).
2Front panel display
Shows information about the operational status of this unit.
3Remote control sensor
Receives infrared signals from the remote control.
4INPUT
Press repeatedly to switch between input sources (see page 41).
Outputs a test tone to experience the sound beam (see page 74).
5VOLUME +/–
Controls the volume level of all audio channels (see page 43).
6STANDBY/ON
Turns on the power of this unit or sets it to the standby mode (see page 27).
Notes
•When you turn on this unit, you will hear a click sound followed by the 4 to
•In the standby mode, this unit consumes a small amount of power in order to receive infrared signals from the remote control.
English