Zebra Technologies 2824-Z manual Replacing the Platen, Removal

Models: 2824-Z

1 62

Page 40

Maintenance

Replacing the Platen

Tools • You will need to use a pointed stylus (such as tweezers, small slot-head screwdriver or razor-knife during this procedure.

Open the printer and remove any media.

1.Using a pointed stylus, unhook the tabs on the right and left sides. Then rotate them forward.

2.Lift the platen out of the printer’s bottom frame.

Make sure the right bearing is on the shaft of the platen.

1.Align the platen with the gear to the left and lower it into the printer’s bottom frame.

2.Rotate the tabs back and snap them into place.

LP 2824-Z User Guide

980531-001 A

Image 40