inside the media compartment that come in contact with the linerless media adhesive should be cleaned, along with:
•Ridged section on the latch
•Area around the Bar/Gap Sensor and Label Pres ence Sensor
•Printhead
•Inside surface of the edge guide
Note: It is not necessary to clean the platen on linerless units. The platen material is self cleaning and will not require constant maintenance.
Never use any sharp objects on printer mechanism as it could damage the print head and platen. Use only the supplied cleaning pen or a cotton swab saturated with alcohol for cleaning. Always turn the printer off prior to any cleaning operation.
Allow printer to dry before resuming printing.