Wireless Communications with Bluetooth™ using ZBR Radio
The following section only applies when the Bluetooth ZBR Module (FCC ID: I28MD-
“Bluetooth” is a worldwide standard for the exchange of data between two devices via radio frequencies. Bluetooth radios are relatively low powered to help prevent interference with other devices running at similar radio frequencies. This limits the range of a Bluetooth device to about 10 meters (about 32 feet).
Both the printer and the device it communicates with must follow the Bluetooth standard.
Exposure to Radio Frequency Radiation
The radiated output power of this internal Bluetooth radio is far below the FCC radio frequency exposure limits. Nevertheless, this Bluetooth radio must be used in such a manner that the antenna is 2.5 cm or further from the human body.
The radio and antenna are mounted internally in this printer such that when the printer is worn with the back of the printer against the body and the front of the printer (where paper exits) away from the body, then the 2.5 cm distance between the antenna and the users body will be met. Do not use the printer in an unauthorized manner.
The internal Bluetooth radio operates within guidelines found in radio frequency safety standards and recommendations. The level of energy emitted is far less than the electromagnetic energy emitted by other wireless devices such as mobile phones.
European Regulatory Information for this Radio
| AUS |
| B | DK | FIN |
|
| F |
| D | GR | IRE |
|
| I |
| LUX | NL | P |
|
|
|
|
|
|
|
|
| E |
| S | UK |
|
|
|
|
|
|
|
|
|
0682 |
|
| Important Notice: | |||
|
| This device is a portable RF printer intended for | ||||
|
| commercial and industrial use in all EU and | ||||
|
| EFTA member states except in France where | ||||
|
| restrictive use applies. | ||||
|
|
|
|
|
|
|