Selecting ZPL Mode
Press | Display Shows | Action/Explanation |
|
| Selecting ZPL Mode: Press the RIGHT or LEFT BLACK OVAL |
|
| key to display other choices. |
|
| Default: ZPL II |
|
| Selections: ZPL II, ZPL |
| ZPL MODE | The printer remains in the selected mode until it is changed by |
|
| this front panel instruction or by using a ZPL/ZPL II command. |
|
| The printer accepts label formats written in either ZPL or ZPL II. |
|
| This eliminates the need to rewrite any ZPL formats you already |
|
| have. Refer to the ZPL II Programming Guide for more |
|
| information on the differences between ZPL and ZPL II. |
|
|
|
Head Close Parameters | ||
|
|
|
|
| Media |
|
| to display other choices. |
|
| Default: Calibration |
|
| Selections: Feed, calibration, length, and no motion |
| MEDIA POWER UP | This parameter establishes the action of the media when the |
|
| printer is turned on. |
|
| • Calibration: Determines the length of the label. |
|
| • Feed: Feeds the label to the first registration point. |
|
| • Length: Used in continuous mode to feed the last stored label |
|
| length. |
|
| • No Motion: Media does not move. |
|
|
|
|
| Head Close: Press the RIGHT or LEFT BLACK OVAL key to |
|
| display other choices. |
|
| Default: Calibration |
|
| Selections: Feed, calibration, length, no motion |
| HEAD CLOSE | Determines the action of the media after the printhead has been |
|
| opened and then closed. |
|
| • Calibration: Determines the length of the label. |
|
| • Feed: Feeds the label to the first registration point. |
|
| • Length: Used in continuous mode to feed the last stored label |
|
| length. |
|
| • No Motion: Media does not move. |
|
|
|
Zebra | 55 |