Front Panel Controls
Front Panel LCD
|
|
| Table 5 • Printer Parameters (Sheet 15 of 15) |
|
| ||
Parameter | Action/Explanation | ||
|
| ||
RTC TIME | RTC | ||
|
| This parameter allows you to set the time following the convention selected in IDLE | |
|
| DISPLAY. | |
|
| 1. | Press the left oval to move to the next digit position. |
|
| 2. | Press the right oval to increase the value of the digit. |
|
|
| |
RFID | TEST | RFID Test | |
QUICK | SLOW | In both versions of this test, the printer attempts to read and write to a transponder. In the | |
|
| slow test, the printer also checks the reader version number. If the printer fails the test, the | |
|
| front panel displays an error message. | |
|
| 1. | Place an RFID label over the reader (no movement occurs with the test). |
|
| 2. | Press SELECT to select the parameter. |
|
| 3. | Press MINUS |
|
|
| OR |
|
|
| Press PLUS (+) to select SLOW. |
|
| 4. | If necessary, press PLUS (+) to select CONTINUE . |
|
| 5. | Press SELECT to deselect the parameter. |
|
|
| |
RFID | TAG | Detect/Specify RFID Tag Type | |
TYPE |
| Default: AUTO DETECT | |
|
| Selections: AUTO DETECT, | |
|
| Note • For the RXiIIIPlus, leave this parameter set to AUTO DETECT. | |
|
|
| |
RFID | ERR | RFID Error Status | |
STATUS | If an error condition exists, a message may be displayed here. | ||
|
| ||
LANGUAGE | Selecting the Display Language | ||
|
| This parameter allows you to change the language used on the LCD. | |
|
| • Press the right or left oval to display other choices. | |
Default: English
Selections: English, Spanish, French, German, Italian, Norwegian, Portuguese, Swedish, Danish, Spanish 2, Dutch, Finnish, Japanese
58 | RXiIIIPlus User Guide | 6/21/2004 |