802.11n Wireless Print Server User Manual

Reset Button

Reboot the Print server:

1.Verify the power of print server is turned on.

2.Press the reset button once, and then release it.

WARNING: This will restart the print server and stop all on-going and pending print jobs!

How to load factory default with the reset button?

1.Turn off the print server.

2.Press the reset button and keep it. I mean DON'T release the

3.Turn on the print server.

4.After seven seconds, release the reset button.

5.The print server will restart and load default automatically.

WARNING: This will erase all settings of print server to default and should be performed with caution!

Print Self-test Page:

1.Verify the power of print server is turned on.

2.Press the reset button for 5 seconds, and then release it.

3.Then the self-test page including the factory default settings will be printed.

Note:

1.It is strongly recommended to use Laser Printer for self-test page printing.

2.Some printers are not supposed to print the self-test page completely. For example, the HP deskjet 948c/895CXi will print the self-test page, but its paper-out LED will light up.

87