8ZOOM G1N/G1XN
9
ZOOM G1N/G1XN
Selecting a Patch for Pl aying (Play Mode)
Selecting a Patch for Playing (Play Mode)
Bank
name
Patch
number

MN

MN

The volume control on the connected amplifier
should be turned down.
When using the unit on batteries
Plugashieldedcableintothe[INPUT]jack.
When using the unit with an AC adapter
Plugthecablefromtheadapterintothe[DCIN]
jack.
Turntheguitaramplifieronandadjustthevolumeto
a suitable position.
Set the Module selector to "PLAY".
The bank and patch number are shown on the display.
Immediately after turning the G1N/G1XN on, the unit
will be in play mode, regardless of the position of the
Module selector.

Turn power on

1

Set the G1N/G1XN to play mode

2

Directly switch a bank

4

Adjust the master level

5
Press the [BANK UP·TAP] key.
Repeatedlypressingthekeycyclesthroughbanksin
the order A ... d, 0 ... 3, A.
With the G1N, using the foot switch (FS01) to switch
banks is also possible (g p. 18).
Operate the [VALUE] knob.
The master level setting appears on the display.
The master level setting applies to all patches. The
settingrangeis0–98,1.0.Itwillberesetto80when
power is turned off and then on again.
When using headphones, this knob adjusts the listening
volume.

Select a patch

3
Use the foot switches.
Press the [Q]footswitchtocallupthenexthigher
patch.
Press the [W]footswitchtocallupthenextlower
patch.
Repeatedlypressingonefootswitchcyclesthrough
patchesintheorderA0–A9...d0–d9,00–09...
30–39,A0.
This section explains basic functions of the play mode.
HINT
HINT
HINT
80

A0 B0

A0 A1

A0 39