26 ZOOM G1u
Effect Types and Parame ters
27
ZOOM G1u
Checking the G1u Version
A1 A9
Analog Delay
This effect simulates an analog delay with a long delay time of up to 5000 msec. The right-digit setting
values control the mixing ratio of the effect sound and the feedback amount.
P1 P9
Ping Pong Delay
This is a ping-pong type delay where the delay sound alternates between left and right. The right-digit setting
values control the mixing ratio of the effect sound and the feedback amount.
R1 R9
Reverse
This is a special delay where the effect sounds as if playing in reverse. Maximum delay time is 2500 msec.
Highersettingsresultinstrongereffectsound.
TIME (Prm2)
Controls parameter 2 of the DELAY module. The setting range is different for the
Reverse effect type and other effect types.
When Delay – Ping Pong Delay is selected
1 50
Time(DelayTime)
Setsthedelaytime.Inthe10–1000millisecondrange,theadjustmentisperformedin10-msecsteps
(1–99,1.0).Above1second,theadjustmentisperformedin100-msecsteps(1.1–5.0).
When Reverse is selected
01 25
Time(DelayTime)
Setsthedelaytime.Inthe10–1000millisecondrange,theadjustmentisperformedin10-msecsteps
(10–99,1.0).Above1second,theadjustmentisperformedin100-msecsteps(1.1–2.5).
nREVERB module
REVERB (Type&Prm1)
Selects the REVERB module effect type and controls parameter 1 at the same time.
H1 H9
Hall
Thisreverbeffectsimulatestheacousticsofaconcerthall.Higherright-digitsettingsincreasethemixing
ratio of the effect sound.
R1 R9
Room
Thisreverbeffectsimulatestheacousticsofaroom.Higherright-digitsettingsincreasethemixingratioof
the effect sound.
S1 S9
Spring
Thiseffectsimulatesaspring-typereverb.Higherright-digitsettingsincreasethemixingratiooftheeffect
sound.
A1 A9
Arena
Thisreverbeffectsimulatestheacousticsofalargevenuesuchasasportsarena.Higherright-digitsettings
increase the mixing ratio of the effect sound.
T1 T9
Tiled Room
Thisreverbeffectsimulatestheacousticsofatiledroom.Higherright-digitsettingsincreasethemixingratio
of the effect sound.
DECAY (Prm2)
Controls parameter 2 of the REVERB module. This parameter is common to all effect
types.
1 30
Decay
Adjuststhedecayduration.
Troubleshooting•Nopower
Referto"Turnpoweron"onpage6.
•Reverbeffectdoesnotoperate
While a rhythm pattern is playing, the reverb
effect is not available. Stop the rhythm pattern
first (g p. 10).
•Delayeffectdoesnotoperate
While the looping function is being used, the
delay effect is not available. Stop the looping
function first (g p. 12).
•Patchswitchingdoesnotchangethe
sound
Is the patch selection method of the G1u set to
"pre-select" (gp.18)?Turnpoweroffandthen
on again to return to normal operation.
•Highlevelofnoise
IsZOOMACadapterbeingused?Besuretouse
onlyanadapterfor9VDC,300mAwithcenter
minus plug (ZOOM AD-0006).
•Batterylifeisshort
Aremanganesebatteriesbeingused?Continuous
operation time is about 10 hours with alkaline
batteries.
Rhythm Function Preset Patterns
# Name TimSig # Name TimSig # Name TimSig # Name TimSig
18beat 1 4/4 11 METAL 2 4/4 21 POP 3 4/4 31 BALLAD 1 4/4
28beat 2 4/4 12 THRASH 4/4 22 DANCE 1 4/4 32 BALLAD 2 3/4
38beat 3 4/4 13 PUNK 4/4 23 DANCE 2 4/4 33 BLUES 1 4/4
48shuffle 4/4 14 DnB 4/4 24 DANCE 3 4/4 34 BLUES 2 3/4
516beat 1 4/4 15 FUNK 1 4/4 25 DANCE 4 4/4 35 JAZZ 1 4/4
616beat 2 4/4 16 FUNK 2 4/4 26 3per4 3/4 36 JAZZ 2 3/4
716shuffle 4/4 17 HIPHOP 4/4 27 6per8 3/4 37 METRO 3 3/4
8ROCK 4/4 18 R'nR 4/4 28 5per4 1 5/4 38 METRO 4 4/4
9HARD 4/4 19 POP 1 4/4 29 5per4 2 5/4 39 METRO 5 5/4
10 METAL 1 4/4 20 POP 2 4/4 30 LATIN 4/4 40 METRO
Checking the G1u Version Checking the G1u Software Version, perform the following steps.
1.TurnpowertotheG1uonwhile
holdingdownthe[BANKUP·TAP]key
and the [Q] foot switch.
The higher two digits of the current version are
shown on the display.
2.Pressthe[Q] foot switch.
The lower two digits of the current version are
shown on the display.
3. Pressing either of the [W]/[Q] foot
switches causes the version display
togooff,andtheG1urestarts.
Detailed information about the latest software
version can be found on the ZOOM web site:
http://www.zoom.co.jp/