25

Audio interface manual

The mixer in audio interface mode

In audio interface mode you can make a mix for monitoring using the R24’s internal
mixer. In addition, you can adjust the balance of the internal mixer and the sound from
the computer.
NOTE
Thereverbsend,pan,volumeandstereolink
settingsare allsavedwhenyouterminate(EXIT)
audio interfacemodeandcanbe usedagainthe
nexttime.
You can be adjust the reverb send, pan, vol-
ume and stereo link settings as in recorder
mode.
Operation is the same as in recorder mode.
(Reference: OPERATION MANUAL)

PAN/EQ menu

VOLUME

Adjust the volumes of INPUTS 1~8.
0~127 (increments of 1)
Default value: 100

REV SEND

Adjust the reverb send levels of INPUTS 1~8.
0~100 (increments of 1)
Default value: 0
Reverb only affects the
monitored signal (as in
recording mode).

PAN (BALANCE)

Adjust the pan for INPUTS 1~8.
L100~R100
(increments of 2)
Default value: Center
(as in recording mode)
Link even and odd numbered INPUTS to handle
them as stereo pairs.
On/Off
Default setting: Off
By setting up a stereo link, volume, reverb send and pan
track parameters can be shared by pairs of even and odd
inputs simultaneously (as in recording mode).
(Reference: Operation Manual)

Volume, reverb send, pan

Balance knob

In audio interface mode, the balance of the in-
put monitoring signal and the signal from DAW
software (the computer) can be adjusted with
the BALANCE knob.

Stereo link

Left
Only the INPUT
1~8 signals
Right
Only the DAW
stereo signal