Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch

Menu 24.10 - System Maintenance - Time and Date Setting

Use Time Server when Bootup= None

Time Server IP Address= N/A

Current Time:

00

: 00

:

00

New Time (hh:mm:ss):

11

: 23

:

16

Current Date:

2000

-

01

-

01

New Date (yyyy-mm-dd):

2000

-

01

-

01

Time Zone= GMT

 

Daylight Saving= No

01 – 01

Start Date (mm-dd):

End Date (mm_dd):

01 – 01

Press ENTER to Confirm or ESC to Cancel:

Figure 13-7 Menu 24.10 System Maintenance — Time and Date Setting

 

Table 13-3 Time and Date Setting Fields

 

 

FIELD

DESCRIPTION

 

 

Use Time Server

Enter the time service protocol that your time server sends when you turn on the

when Bootup

Prestige. Not all time servers support all protocols, so you may have to check with

 

your ISP/network administrator or use trial and error to find a protocol that works.

 

The main differences between them are the format.

 

Daytime (RFC 867) format is day/month/year/time zone of the server.

 

Time (RFC-868)format displays a 4-byte integer giving the total number of

 

seconds since 1970/1/1 at 0:0:0.

 

NTP (RFC-1305) is similar to Time (RFC-868).

 

None is the default value. Enter the time manually. Each time you turn on the

 

Prestige, the time and date will be reset to 2000-1-1 0:0:0.

 

 

Time Server IP

Enter the IP address of your time server or its domain name (if your time server is

Address

using DNS). Check with your ISP/network administrator if you are unsure of this

 

information.

 

 

Current Time

This field displays an updated time only when you reenter this menu.

New Time

Enter the new time in hour, minute and second format.

 

 

Current Date

This field displays an updated date only when you reenter this menu.

New Date

Enter the new date in year, month and day format.

 

 

13-6

System Maintenance & Information