ZyXEL Communications 314 PLUS Menu 15.3 — Trigger Port Setup, Figure 4-13Menu 15.3: Trigger Port Setup, Two Points To Remember About Trigger Ports

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch

4.The Prestige forwards the traffic to Jane’s computer IP address.

5.Only Jane can connect to the Real Audio server until the connection is closed or times out. The Prestige times out in three minutes with UDP (User Datagram Protocol) or two hours with TCP/IP (Transfer Control Protocol/Internet Protocol).

Two Points To Remember About Trigger Ports

1.Trigger events only happen on data that is going coming from inside the Prestige and going to the outside.

2.If an application needs a continuous data stream, that port (range) will be tied up so that another computer on the LAN can’t trigger it.

Only one LAN computer can use a trigger port (range) at a time.

Enter 3 in menu 15 to display Menu 15.3 — Trigger Port Setup, shown next.

		Menu 15.3 - Trigger Port Setup
Rule	Name	Incoming		Trigger
		Start Port	End Port	Start Port	End Port
----------------------------------------------------------------------
1.	Real Audio	6970	7170	7070	7070
2.		0	0	0	0
3.		0	0	0	0
4.		0	0	0	0
5.		0	0	0	0
6.		0	0	0	0
7.		0	0	0	0
8.		0	0	0	0
9.		0	0	0	0
10.		0	0	0	0
11.		0	0	0	0
12.		0	0	0	0

Press ENTER to Confirm or ESC to Cancel:

Figure 4-13 Menu 15.3: Trigger Port Setup

NAT 4-17