ZyXEL Communications 480 manual Edit IPX Static Route Menu Fields, Field Description

Prestige 480 Dual BRI ISDN Router

The following table contains the instructions on how to configure the Edit IP Static Route Menu.

	Edit IPX Static Route Menu Fields
Field	Description
Server Name	In this field, enter the name of the server. This must be the exact name configured in
	the NetWare server.
Network #	This field contains the internal network number of the remote server that you wish to
	access. [00000000] or [FFFFFFFF] are reserved.
Node #	This field contains the address of the node on which the server resides. If you are
	using a Novell IPX implementation, this value is [000000000001].
Socket #	This field contains the socket number on which the server will receive service
	requests. The default for this field is hex [0451].
Type #	This field identifies the type of service the server provides. The default for this field is
	hex [0004].
Gateway Node	In this field, enter the number of the remote node that is the gateway for this static
	route.
Hop Count and	These two fields have the same meaning as those in the Ethernet setup.
Tick Count

Once you have completed filling in the m enu, press [Enter] at the message [Press ENTER to Confirm…] to save your configuration, or press [Esc] to cancel to cancel.

IPX Configuration 6-11