ZyXEL Communications 480 System Maintenance Menu Unix Syslog Parameters, System Maintenance 13-11

Prestige 480 Dual BRI ISDN Router

You need to configure the parameters described in the table below to activate syslog.

Table 13-3 System Maintenance Menu - UNIX Syslog Parameters

Parameter	Description
Active	Use the space bar to turn on or off syslog.
Syslog IP Address	Enter the IP Address of your syslog server.
Log Facility	Use the space bar to toggle between the 7 different Local options. The log facility
	allows you to log the message in different files in the server. Please refer to your
	UNIX manual for more detail.
Types:
CDR	Call Detail Record (CDR) logs all data phone line activity if set to Yes.
Packet triggered	The first 48 bytes or octets and protocol type of the triggering packet is sent to the
	UNIX syslog server when this field is set to Yes.
Filter log	No filters are logged when this field is set to No. Filters with the individual filter Log
	Filter field set to Yes are logged when this field is set to Yes.
PPP log	PPP events are logged when this field is set to Yes.

Your Prestige sends four types of syslog messages. Please see Enhanced Syslog in the Appendix for the message format. Some examples of these syslog messages are shown next:

1.CDR

Jul 19 11:19:27 192.168.102.2 ZyXEL Communications Corp.: board 0 line 0 channel 0, call 1, C01 Outgoing Call dev=2 ch=0 40002

Jul 19 11:19:32 192.168.102.2 ZyXEL Communications Corp.: board 0 line 0 channel 0, call 1, C02 OutCall Connected 64000 40002

Jul 19 11:20:06 192.168.102.2 ZyXEL Communications Corp.: board 0 line 0 channel 0, call 1, C02 Call Terminated

System Maintenance 13-11