ZyXEL Communications 480 Navigating the SMT Interface, Entering Password, Main Menu Commands

Prestige 480 Dual BRI ISDN Router

Figure 2-3 Power-On Display

Step 2. Entering Password

The login screen appears after you press [Enter], prompting you to enter the password, as shown next.

For your first login, enter the default password 1234. As you type the password, the screen displays a ( X)

Enter Password : XXXX

for each character you type.

Figure 2-4 Login Screen

Please note that if there is no activity for longer than 5 minutes after you log in, your Prestige will automatically log you out and will display a blank screen. If you see a blank screen, press [Enter] to bring up the login screen again.

2.7Navigating the SMT Interface

The SMT (System Management Terminal) is the interface that you use to configure your Prestige.

Several operations that you should be familiar with before you attempt to modify the configuration are listed in the table below.

	Table 2-2 Main Menu Commands
Operation	Press/<read>	Description
Move forward to	[Enter]	To move forward to a sub-menu, type in the number of the
another menu		desired sub-menu and press [Enter].
Move backward to	[Esc]	Press the [Esc] key to move back to the previous menu.
a previous menu
Move to a submenu	Press the [Space	Fields beginning with “Edit” have a default setting of No. Press
	bar] to change NO	the [Space bar] to change No to Yes, then press [ENTER] to go

Hardware Installation and Setup 2-5