ZyXEL Communications B-120 manual 9

PROBLEM	CORRECTIVE ACTION
	Install the ZyAIR in another computer. If the error persists, you
	may have a hardware problem. In this case, you should contact
	your local vendor.
Cannot start the	Make sure the ZyAIR is properly inserted and the LINK LED
ZyAIR Wireless	blinks.
LAN Utility.
	Check for possible hardware conflicts. In Windows, click Start,
	Settings, Control Panel, System, Hardware and then click
	Device Manager. Verify the status of the modem under
	Network Adapter. (Steps may vary depending on the version
	of Windows).
	Install the ZyAIR in another computer. If the error persists, you
	may have a hardware problem. In this case, you should contact
	your local vendor.
The ZyAIR	When the ZyAIR Wireless LAN Utility displays only three tabs,
Wireless LAN	you are using the Windows XP wireless configuration tool at the
Utility displays	same time. Refer to the Disable Windows XP Configuration
only three tabs.	Tool section to disable the Windows XP wireless configuration
	tool.

9