ES-2108 Series User’s Guide

 

Table 9 General Setup (continued)

 

 

 

 

LABEL

DESCRIPTION

 

 

 

 

Use Time Server

Enter the time service protocol that your timeserver uses. Not all time servers

 

when Bootup

support all protocols, so you may have to use trial and error to find a protocol that

 

 

works. The main differences between them are the time format.

 

 

When you select the Daytime (RFC 867) format, the switch displays the day,

 

 

month, year and time with no time zone adjustment. When you use this format it is

 

 

recommended that you use a Daytime timeserver within your geographical time

 

 

zone.

 

 

Time (RFC-868)format displays a 4-byte integer giving the total number of seconds

 

 

since 1970/1/1 at 0:0:0.

 

 

NTP (RFC-1305)is similar to Time (RFC-868).

 

 

None is the default value. Enter the time manually. Each time you turn on the

 

 

switch, the time and date will be reset to 2000-1-1 0:0.

 

Time Server IP

Enter the IP address of your timeserver. The switch searches for the timeserver for

 

Address

up to 60 seconds. If you select a timeserver that is unreachable, then this screen

 

 

will appear locked for 60 seconds. Please wait.

 

Current Time

This field displays the time you open this menu (or refresh the menu).

 

 

 

 

New Time

Enter the new time in hour, minute and second format. The new time then appears

 

(hh:min:ss)

in the Current Time field after you click Apply.

 

Current Date

This field displays the date you open this menu.

 

 

 

 

New Date (yyyy-

Enter the new date in year, month and day format. The new date then appears in

 

mm-dd)

the Current Date field after you click Apply.

 

Time Zone

Select the time difference between UTC (Universal Time Coordinated, formerly

 

 

known as GMT, Greenwich Mean Time) and your time zone from the drop-down list

 

 

box.

 

Apply

Click Apply to save the settings.

 

 

 

 

Cancel

Click Cancel to reset the fields to your previous configuration.

 

 

 

7.4 Introduction to VLANs

A VLAN (Virtual Local Area Network) allows a physical network to be partitioned into multiple logical networks. Devices on a logical network belong to one group. A device can belong to more than one group. With VLAN, a device cannot directly talk to or hear from devices that are not in the same group(s); the traffic must first go through a router.

In MTU (Multi-Tenant Unit) applications, VLAN is vital in providing isolation and security among the subscribers. When properly configured, VLAN prevents one subscriber from accessing the network resources of another on the same LAN, thus a user will not see the printers and hard disks of another user in the same building.

VLAN also increases network performance by limiting broadcasts to a smaller and more manageable logical broadcast domain. In traditional switched environments, all broadcast packets go to each and every individual port. With VLAN, all broadcasts are confined to a specific broadcast domain.

Note: VLAN is unidirectional; it only governs outgoing traffic.

Chapter 7 Basic Setting

65