Chapter 46 User and Enable Mode Commands
46.2.2 show ipSyntax:
show ip
This command displays the IP related information (such as IP address and subnet mask) on all Switch interfaces.
The following figure shows the default interface settings.
sysname> show ip Management IP Address
IP[192.168.0.1], Netmask[255.255.255.0], VID[0] IP Interface
IP[192.168.1.1], Netmask[255.255.255.0], VID[1] sysname>
46.2.3 show loggingSyntax:
show logging
This command displays the system logs. The following figure shows an example.
sysname# | show | logging |
| SNMP TRAP 3: link up | ||
1 | Thu | Jan | 1 | 00:02:08 1970 PP05 | ||
2 | Thu | Jan | 1 | 00:03:14 1970 | INFO | adjtime task pause 1 day |
3 | Thu | Jan | 1 | 00:03:16 1970 PP0f | SNMP TRAP 26: Event On Trap | |
4 | Thu | Jan | 1 | 00:03:16 1970 PINI | SNMP TRAP 1: warm start | |
5 | Thu | Jan | 1 | 00:03:16 1970 PINI | SNMP TRAP 3: link up | |
6 | Thu | Jan | 1 | 00:03:16 1970 PINI | INFO | main: init completed |
7 | Thu | Jan | 1 | 00:00:13 1970 PP26 | INFO | adjtime task pause 1 day |
8 | Thu | Jan | 1 | 00:00:14 1970 PP0f | SNMP TRAP 26: Event On Trap | |
9 | Thu | Jan | 1 | 00:00:14 1970 PINI | SNMP TRAP 0: cold start | |
10 | Thu | Jan | 1 | 00:00:14 1970 PINI | INFO | main: init completed |
11 | Thu | Jan | 1 | 00:00:04 1970 PP05 | SNMP TRAP 3: link up | |
11 | Thu | Jan | 1 | 00:00:04 1970 PP05 | SNMP TRAP 3: link up | |
Clear Error Log | (y/n): |
|
| |||
"If you clear a log (by entering y at the Clear Error Log (y/n):prompt), you cannot view it again.
46.2.4show interfaceSyntax:
show interface
386 |
| |
| ||
|
|
|