Chapter 4 Introducing the Web Configurator
Table 5 Navigation Panel
LABEL |
| DESCRIPTION |
Port Setup |
| This link takes you to screens where you can configure settings for individual |
|
| switch ports. |
|
|
|
Advanced Application |
| |
|
| |
VLAN |
| This link takes you to screens where you can configure |
|
| VLAN (depending on what you configured in the Switch Setup menu). |
|
|
|
Static MAC |
| This link takes you to screens where you can configure static MAC addresses |
Forwarding |
| for a port. These static MAC addresses do not age out. |
|
|
|
Filtering |
| This link takes you to a screen to set up filtering rules. |
|
|
|
Spanning Tree |
| This link takes you to screens where you can configure spanning tree settings to |
Protocol |
| prevent network loops. |
|
|
|
Bandwidth Control |
| This link takes you to screens where you can cap the maximum bandwidth |
|
| allowed from specified source(s) to specified destination(s). |
|
|
|
Broadcast Storm |
| This link takes you to a screen to set up broadcast filters. |
Control |
|
|
|
|
|
Mirroring |
| This link takes you to screens where you can copy traffic from one port or ports |
|
| to another port in order that you can examine the traffic from the first port |
|
| without interference |
|
|
|
Link Aggregation |
| This link takes you to a screen where you can logically trunk physical links to |
|
| form one logical, |
|
|
|
Port Authentication |
| This link takes you to a screen where you can configure RADIUS (Remote |
|
| Authentication |
|
| allows you to use an external server to validate an unlimited number of users. |
|
|
|
Port Security |
| This link takes you to a screen where you can activate MAC address learning |
|
| and set the maximum number of MAC addresses to learn on a port. |
|
|
|
Classifier |
| This link takes you to a screen where you can configure classifiers. |
|
|
|
Policy Rule |
| This link takes you to a screen where you can configure policy rules. |
|
|
|
Queuing Method |
| This link takes you to a screen where you can configure SPQ or WRR with |
|
| associated queue weights for each port. |
|
|
|
Multicast |
| This link takes you to a screen where you can configure various multicast |
|
| features and create multicast VLANs. |
|
|
|
DHCP Relay |
| This link takes you to a screen where you can configure DHCP relay |
|
| information. |
|
|
|
IP Application |
|
|
|
|
|
Static Routing |
| This link takes you to screens where you can configure static routes. A static |
|
| route defines how the switch should forward traffic by configuring the TCP/IP |
|
| parameters manually. |
|
|
|
Management |
| |
|
| |
Maintenance |
| This link takes you to screens where you can perform firmware and |
|
| configuration file maintenance as well as reboot the system. |
|
|
|
Access Control |
| This link takes you to screens where you can change the system login password |
|
| and configure SNMP and remote management. |
|
|
|
Diagnostic |
| This link takes you to screens where you can view system logs and test port(s). |
|
|
|
Syslog |
| This link takes you to screens where you can configure the device’s system |
|
| logging settings. |
|
|
|
Cluster |
| This link takes you to a screen where you can configure clustering management |
Management |
| and view its status. |
|
|
|
56 |
| |
| ||
|
|
|