Chapter 2 Hardware Description and Connection
2Align the holes on the back of the Switch with the screws on the wall. Hang the Switch on the screws.
The Switch should be
2.3.2 Rack Mounting
Attaching the Mounting Brackets to the Switch
1Position a mounting bracket on one side of the Switch, lining up the four screw holes on the bracket with the screw holes on the side of the Switch.
Figure 6 Attaching the Mounting Brackets
2Using a #2 Philips screwdriver, install the M3 flat head screws through the mounting bracket holes into the Switch.
3Repeat steps 1 and 2 to install the second mounting bracket on the other side of the Switch.
4You may now mount the Switch on a rack. Proceed to the next section.
10 |
| |
| ||
|
|
|