Chapter 9 VLAN
Table 19 | Advanced Application > VLAN > Static VLAN (continued) |
LABEL | DESCRIPTION |
* | Settings in this row apply to all ports. |
| Use this row only if you want to make some settings the same for all |
| ports. Use this row first to set the common settings and then make |
| adjustments on a |
| Note: Changes in this row are copied to all the ports as soon as you |
| make them. |
|
|
Control | Select Normal for the port to dynamically join this VLAN group using |
| GVRP. This is the default selection. |
| Select Fixed for the port to be a permanent member of this VLAN group. |
| Select Forbidden if you want to prohibit the port from joining this VLAN |
| group. |
|
|
Tagging | Select TX Tagging if you want the port to tag all outgoing frames |
| transmitted with this VLAN Group ID. |
|
|
Add | Click Add to save your changes to the Switch’s |
| Switch loses these changes if it is turned off or loses power, so use the |
| Save link on the top navigation panel to save your changes to the non- |
| volatile memory when you are done configuring. |
|
|
Cancel | Click Cancel to change the fields back to their last saved values. |
|
|
Clear | Click Clear to start configuring the screen again. |
|
|
VID | This field displays the ID number of the VLAN group. Click the number to |
| edit the VLAN settings. |
|
|
Active | This field indicates whether the VLAN settings are enabled (Yes) or |
| disabled (No). |
|
|
Name | This field displays the descriptive name for this VLAN group. |
|
|
Delete | Click Delete to remove the selected entry from the summary table. |
|
|
Cancel | Click Cancel to clear the Delete check boxes. |
100 |
| |
| ||
|
|
|