Chapter 7 Wireless LAN
Table 24 Network > Wireless LAN > General
LABEL | DESCRIPTION |
Apply | Click Apply to save your changes back to the |
|
|
Reset | Click Reset to reload the previous configuration for this screen. |
|
|
See the rest of this chapter for information on the other labels in this screen.
7.4.1 No Security
Select No Security to allow wireless stations to communicate with the access points without any data encryption.
Note: If you do not enable any wireless security on your
Figure 43 Network > Wireless LAN > General: No Security
The following table describes the labels in this screen.
Table 25 Network > Wireless LAN > General: No Security
LABEL | DESCRIPTION |
Security Mode | Choose No Security from the |
|
|
Apply | Click Apply to save your changes back to the |
|
|
Reset | Click Reset to reload the previous configuration for this screen. |
|
|
7.4.2 WEP Encryption
WEP encryption scrambles the data transmitted between the wireless stations and the access points to keep network communications private. It encrypts unicast and multicast communications in a network. Both the wireless stations and the access points must use the same WEP key.
Your
74 |
|
|
|