Chapter 9 Wireless LAN Profiles

 

 

Table 31 Command Summary: Radio Profile (continued)

COMMAND

 

DESCRIPTION

2g-support-speed {disable

Disables or sets the 2.4 GHz support rate.

wlan_2g_support_speed}

The default is 1.0~54.0.

2g-mcs-speed {disable

Disables or sets the 2.4 GHz HT MCS rate.

wlan_mcs_speed}

 

The default is 0~15.

2g-multicast-speed

 

When you disable multicast to unicast, use this

wlan_2g_support_speed

command to set the data rate { 1.0 2.0 … } in

 

 

Mbps for 2.4 GHz multicast traffic.

5g-basic-speedwlan_5g_basic_speed

Sets the 5 GHz basic band rate.

 

 

The default is 6.0 12.0 24.0.

 

 

5g-support-speed {disable

Disables or sets the 5 GHz support rate.

wlan_5g_support_speed}

The default is 6.0~54.0.

5g-mcs-speed {disable

Disables or sets the 5 GHz HT MCS rate.

wlan_mcs_speed}

 

The default is 0~15.

5g-multicast-speed

 

When you disable multicast to unicast, use this

wlan_5g_basic_speed

}

command to set the data rate { 6.0 9.0 … } in

{

Mbps for 5 GHz multicast traffic.

 

 

 

 

 

tx-maskchain_mask

 

Sets the outgoing chain mask rate.

rx-maskchain_mask

 

Sets the incoming chain mask rate.

[no] htprotection

 

Activates HT protection for this profile. Use the no

 

 

parameter to disable it.

 

 

By default, this is disabled.

 

 

output-power wlan_power

Sets the output power for the radio in this profile.

 

 

The default is 100%.

[no] ssid-profile

 

Assigns an SSID profile to this radio profile. Requires an

wlan_interface_index ssid_profile

existing SSID profile. Use the no parameter to disable it.

exit

 

Exits configuration mode for this profile.

show wlan-monitor-profile {all

Displays all monitor profiles or just the specified one.

monitor_profile_name}

 

 

wlan-monitor-profile rename

Gives an existing monitor profile

monitor_profile_name1

 

(monitor_profile_name1) a new name

monitor_profile_name2

 

(monitor_profile_name2).

 

 

[no] wlan-monitor-profile

Enters configuration mode for the specified monitor

monitor_profile_name

 

profile. Use the no parameter to remove the specified

 

 

profile.

 

 

 

[no] activate

 

Makes this profile active or inactive.

 

 

By default, this is enabled.

 

 

scan-method scan_method

Sets the channel scanning method for this profile.

[no] 2g-scan-channel

 

Sets the broadcast band for this profile in the 2.4 Ghz

wireless_channel_2g

 

frequency range. Use the no parameter to disable it.

 

 

 

[no] 5g-scan-channel

 

Sets the broadcast band for this profile in the 5 GHz

wireless_channel_5g

 

frequency range. Use the no parameter to disable it.

 

 

scan-dwell <100..1000>

Sets the duration in milliseconds that the device using

 

 

this profile scans each channel.

exit

 

Exits configuration mode for this profile.

 

81

NXC CLI Reference Guide