Chapter 8 LAN Setup
8.2 The LAN Screen
Use this screen to configure your LAN settings. Click Interface Setup > LAN to display the following screen.
Follow these steps to configure your LAN settings.
1Enter an IP address into the IP Address field. The IP address must be in dotted decimal notation. This will become the IP address of your
2Enter the IP subnet mask into the IP Subnet Mask field. Unless instructed otherwise it is best to leave this alone, the configurator will automatically compute a subnet mask based upon the IP address you entered.
3Click SAVE to save your settings.
Figure 28 Interface Setup > LAN
The following table describes the fields in this screen.
Table 17 Interface Setup > LAN
LABEL | DESCRIPTION |
Router Local IP |
|
|
|
IP Address | Enter the LAN IP address you want to assign to your |
| dotted decimal notation, for example, 192.168.1.1 (factory default). |
|
|
IP Subnet Mask | Type the subnet mask of your network in dotted decimal notation, for |
| example 255.255.255.0 (factory default). Your |
| automatically computes the subnet mask based on the IP Address you |
| enter, so do not change this field unless you are instructed to do so. |
|
|
| 77 |
|
|