ZyXEL Communications P-791R v2 quick start V, V

P-791R v2 Quick Start Guide
3
Look at the LEDs
•The POWER LED blinks green while your P-791R v2 starts up and stays on when it is
ready.
•The DSL LED blinks while the P-791R v2 is trying to establish a connection with the ISP
and stays on when the connection is established.
•The ETHERNET LED stays on if the ETHERNET port is properly connected and blinks
when there is traffic.
VIf any of these LEDs are off, check your connections, and inspect your
cables for damage. If the LEDs are still off, contact your local vendor.
2 Status Page
Use the status screen to view basic setup information.
1Open your Internet browser, and enter
http://192.168.1.1.
VIf you cannot access the web configurator, make sure you allow pop-up
windows and JavaScripts and set up Java permissions appropriately. See
the User’s Guide for more information and further troubleshooting tips.
VMake sure your computer’s IP address is in the same subnet as the P-791R
v2’s LAN IP address.