P-871M User’s Guide

5 Use the included power adaptor to connect the POWER socket to a proper power source.

6 Push the power switch to the on position.

1.2 CPE Mode

CPE

1

6

CO

4

5

2

3

 

 

1 Set the CO/CPE switch on the rear panel to the CPE side.

2 Use the included console cable to connect the CONSOLE port to your computer’s COM port for configuration.

3 Use the included yellow Ethernet cable to connect the ETHERNET port to your network device, such as a switch.

4Over ISDN: Use the included gray cable with a RJ-45 connector to connect the DSL port to another P-871M in CO mode.

Over POTS: Use the included gray cable with a RJ-11 connector to connect the DSL port to another P-871M in CO mode.

5Use the included power adaptor to connect the POWER socket to a proper power source.

4