ENGLISH

If the or lights do not behave as expected, first check the STB- 1001H’s connections. Make sure that the power is on and the Internet access device is working. If this does not help, restart the STB-1001H (switch it off, then on using the ON/OFF switch on the rear panel). If the problem persists, contact your vendor.

3A start-up picture displays on the television. When the STB-1001H has successfully started up, the Home menu displays. Your STB-1001H is ready to use!

"The TV pictures shown in this Quick Start Guide are examples; what you see may be different (depending on your IPTV service provider).

3 Use the Remote Control

Before you first use the remote control, take the following steps to insert two AAA-size batteries.

1 Press the battery cover release catch in and lift the cover off.

2Press the batteries into the compartment. The negative (-) end of each battery should be at the end of the slot that has a spring.

3Replace the cover.

4