VIZIO VL420M/VL470M User Manual
26
www.VIZIO.com
STEREO SYSTEM
Connecting an External Receiver/Amp
1. Turn off the power to the HDTV and Receiver/Amp.
2. Using an audio cable (white and red connectors), connect the
cable to the audio input connectors on the Receiver/Amp and
connect the other end to the AUDIO OUT audio connectors at the
rear of the HDTV.
3. Turn on the power to the HDTV and Receiver/Amp.
4. Then press the MENU button on the remote control to open the
On-Screen Display (OSD) menu.
5. Press " on the remote control to highlight the Audio menu, then
press #II to select.
6. Press " on the remote control to select SPEAKERS.
7. Press # on the remote control to select OFF so the sound from
the HDTV will be routed through your Receiver/Amp system.
Note:
! Refer to your Receiver/Amp user manual to select the corresponding audio input.
! The audio output is not amplified and cannot be connected directly to external speakers.
Optica l Outpu t of au dio re ceived with HD Progr ams
If your sound system has a SPDIF (optical) digital audio input you can connect it to the OPTICAL
digital audio out at the rear of the HDTV. This is active when receiving audio with the programs being
viewed no matter what input is being used.