ZyAIR G-220 User’s Guide

3.2.1 Connecting to a Network

Follow the steps below to connect to a network.

Step 1. Click Refresh to scan for all available wireless networks within range.

Step 2. To join a network, either click an entry in the table to select a wireless network and then click Connect this site or double-click an entry.

Step 3. If the WEP field displays On for the selected wireless network, the following screen displays.

Figure 3-2 Station Mode: Use Previous WEP Setting

Step 4. Click No to display the WEP Key Setting… screen and refer to Section 3.4 to set up WEP keys. Otherwise click Yes to use the previously configured WEP settings.

Step 5. To verify that you have successfully connected to the selected network, check the network information on the bottom of the ZyAIR USB Utility screen.

3.3The More Setting… Screen

Click More Setting… in the ZyAIR Utility program to display the More Setting… screen as shown next.

Access Point Mode Configuration

3-3