Chapter 8 Security
Table 28 Advanced Setup > Security > IP Filtering > Outgoing
LABEL | DESCRIPTION |
Add | Click this button to go to a screen where you can configure settings for a |
| new entry. |
|
|
Remove | To remove a WAN connection, select its Remove check box and click the |
| Remove button. |
|
|
8.2 Adding Outgoing IP Filtering Rules
To add an outgoing IP filtering rule, click Advanced Setup > Security > IP Filtering > Outgoing > Add. The screen appears as shown.
Figure 43 Advanced Setup > Security > IP Filtering > Outgoing > Add
The following table describes the labels in this menu.
Table 29 Advanced Setup > Security > IP Filtering > Outgoing > Add
LABEL | DESCRIPTION |
Filter Name | Type the name configured to identify the filter entry. |
|
|
Protocol | Select the type of packets to which this entry applies (TCP, UDP, or both). |
|
|
Source IP | Type the IP address of a LAN computer to which this entry applies. |
Address |
|
|
|
Source | Type the subnet mask of a LAN computer to which this entry applies. |
Subnet |
|
Mask |
|
|
|
Source Port | Type the source port for traffic (from the LAN) to which this entry applies. |
|
|
Destination | This is the IP address and subnet mask of a computer on the Internet to |
IP Address | which this entry applies. |
|
|
Destination | Type the subnet mask of a computer on the Internet to which this entry |
Subnet | applies. |
Mask |
|
|
|
94 |
| |
| ||
|
|
|